Parts
For part codes, manufacturers, supplier and cost information see:
| Part | Image | Description |
|---|---|---|
| Printed Circuit Board (PCB) |  | A standard double-sided commercially manufactured PCB. Its easy to order the PCB from a manufacturer, the PCB colour is an option. See its GitHub repository: SMBeeHive PCB. |
| Laser-cut acrylic case / jig |  | A custom laser cut acrylic case. See its GitHub repository SMBeeHiveF360. |
| 12V DC-DC converter |  | This step-up/step-down voltage regulator generates the 12V programming voltage from the 5V USB supply. Supplied with header pins. |
| USBASP module & cable |  | An inexpensive ISP programmer. Note: this requires reprogramming to support the ATTiny10 TPI programming protocol and to control the 12V programming voltage. |
| Sprung contact pins |  | Connects to the electrical contacts on the bees feet. |
| Switch |  | TE FSM4JH. Single pole, single throw (SPST), normally open. |
| Resistors |  | 2012 (0805) SMD 150mW 5% or better (1% shown). R1: 220R. R2: 1K. |
| Diode D1 |  | Schottky diode for low forward volt drop. |
| Header pins |  | 5 x 2 header pins to connect to the USBASP module ribbon cable. |
| Nylon screws |  | 15mm, M3 Coarse (0.5mm pitch) , nylon, pan-head screws. |
| Adhesive feet |  | 3.8mm stick-on feet. |